Reclaimed Rubber Machine Use Rubber Powder Rubber Cracker Rubber Crusher Pulvervizer Shredder

Reclaimed Rubber Machine Use Rubber Powder Rubber Cracker  Rubber Crusher Pulvervizer Shredder

Reclaimed rubber device

. Attribute and Construction

one. This is a double roll rubber-mixing device. It is made up of motor, gear-down reducer, driving gears, pace-ratio gears, entrance and back rolls, bearings, body, protect, mattress plate, altering pin gadget, emergency end gadget, roll temperature adjusting gadget, lubricating gadget and materials plate, and so forth.

2. Front and back again rolls are parallel mounted in the bearing of body. By implies of reducer, driving gears, speed ratio gears, the motor drives the front and back again rolls rotate toward each other so that rubber-cracking is started. The rolls are produced from chilled solid alloy iron The internal of it is hollow. Steam and cooling h2o can move via them so that the surface temperature can be modified. Its area possesses higher hardness and fineness.

three. Roller bearing, copper bushing is fixed in the bearing base of frame. Again roll bearing bases are fastened up on body, and the entrance roll-bearing foundation can slide in the information-rail of body.

4. Roll spacing modifying is carried out by implies of the reverse of hand wheel makes the thread rod push front bearing base movement. The roll pin minimizes when the hand wheel rotates clockwise, in any other case it will enhance.

5. The emergency stopping system is mounted in the frame. In irregular scenario, pulling the rod, by way of dynamic, the machine is stopped instantly.

six. Altering temperature unit is two spray pipes with numeral rows of holes, increase the two pipes into the hollow roll, the holes are in the place of doing work segment of the roll. The position of holes slants to thirty degree internal course so that the spraying water and steam is directed at getting in touch with angle of sizing substance, this can manage the surface temperature of roll.

Type

CZPT parameter
 

XKP-four hundred
 
XKP-450
 
XKP-560
 
Front roll diameter(mm)
 
400
 
450
 
560
 
Rear roll diameter(mm)
 
four hundred(Groove roller)
 
450(Groove roller)
 
510(Groove roller)
 
Functioning length of rolls(mm)
 
600
 
650
 
800
 
Front roll floor pace(m/min)
 
seventeen.32
 
23.two
 
24.fifty six
 
Friction ratio
 
1:one.38
 
1:1.38
 
one:1.30
 
Max.nip(mm0
 
eight
 
8
 
fifteen
 
Motor electricity
 
forty five
 
55
 
75
 
Overall dimension: length×Width×Height(mm)
 
3950×1800×1780
 
4770×1846×1835
 
5064
 


 

Reclaimed Rubber Machine Use Rubber Powder Rubber Cracker  Rubber Crusher Pulvervizer Shredder