Two Benches and Rails of Automatic Fastening Machine

Two Benches and Rails of Automatic Fastening Machine

Desktop Screw Magnetic Feeding One CZPT Dual Rail Robotic Fastening Machine

Robotic screw driving equipment is made for screw fastening with high precision instantly.


Model Topbest-SM-6331
Dimension 800mmX630mmX780mm
Max. product dimension 250*280mm
Driving mode Closed-loop motor+synchronous belt
Control manner Microcontroller, contact panel
Shifting range X Axis X=580mm
Y1/Y2 Axis Y1=280mm,Y2=280mm
Z Axis Z=100mm
Max. pace X, Y1/Y2 Axis 600mm/sec.
Z Axis 400mm/sec.
Repeated accuracy   X, Y1/Y2 Axis ±0.02mm
Z Axis ±0.02mm
Memory 1000 data files
Screwdriver SD/KILEWS/HIOS
Screw feeding Magnetic feeding
Max load 15KG
Alarm method Screw stripped alarm
Programming Remote educating / Handbook information input
Web fat 76KG
Enter voltage 220V AC/50Hz(110V AC/60Hz)
Air force .4~.8MPa
Function environment ~40ºC, Humidity 20%~ninety five%

Deep-hole screw fastening

1. Automated screw feeding.
two. Dual rail to maximize efficiency.
3. Deep-hole screw fastening.
4. Wise screwdriver to file torque for each and every screw (optional).



1.  Why is Robotic Screw driving machine?
  — To give far better in term of high quality such as identical study out trace torque for every level of creation.
  — Higher efficiency by minimizing manpower at least a single to a few particular person.

2  What are the feeding types for the Robotic Screw Driving System?
  — We using the vibrator to kind the screw dependent on screw type and dimension.
  — Firstly we using the pick and area of the screw presenter.
  — Another way is we employing air blowing to feed right to the screwdriver.

three. How to utilize the screw to the merchandise?
  — Mainly, we have two approaches to screw the product which is magnetic for ferrous screw and vacuum for all materials including ferrous, copper, stainless steel screw.

4. What type of screws are fit for the air blowing kind machine?
  — Screw designs M1.four~ M4 are suit for air blowing feeding of screw driving device.
  — Screw size need to much less than 16mm. If more than, the feeder needs to be CZPT.  
  — The screw’s size have to be in excess of one.two times of diameter for air blowing feeding variety to stop the screw from change more than within the feeder’s tube.

5. What sort of screws are suit for the screw presenter type equipment?
  — Screw models M0.eight ~ M4 are match for Magnetic, vacuum feeding of screw driving equipment.
  — Machine screws, self-tapping screws, etc.

six. When does the machine have several electric screwdrivers?
  — For large effectiveness, we offer you dual screwdriver for concurrently fastening for the item in array situation.

seven. What does an electric screwdriver the equipment use?
  — Currently, we are making use of the electrical screwdriver from Kilews, Sudong, DEPRAG, DESOUTTER, MOUNTZTORQUE, HIOS, and Atlas.

8. What is the selection of the tapped hole’s depth on the products?
  — The selection is about 20mm, dependent on client merchandise and must be magnetic screw kind.

nine. What is the widespread dilemma for the duration of the fastening method?
  — There are 5 common problems could take place during the process this sort of as misalignment entry, broken screw, damaged thread, lacking element and floating screw.

ten. What are the distinctions in between SC-2 and GW-4 ?
  — GW using gravity to transfer the screw to the nozzle and press to release the screw. The screwdriver nozzle contacted with the solution surface and it is very likely to somewhat harm the area.
  — SC-two utilizing air blowing to transfer the screw to the nozzle and press button to launch the screw.

eleven. How is twin rail working?
  — Our device has a twin rails system to permit loading on the next rail simultaneously even though the initial rail is on the fastening approach.

12. What is the goal of one particular rail technique?
  — One rail system occupy tiny workspace or even bigger product.

13. Does the device occur with a guarantee?
  — The machine comes with one 12 months warranty excluding consumable parts.

fourteen. How about soon after-sale service?
  — We supply distant movie and 24hours telephone or you may visit our business. On-web site provider will be billed appropriately.

15. What is the measurement of the functioning base?
  — Working base dimension as said for every single machine. Fixture dimension must be in thing to consider. However, the dimension of products can be CZPT in accordance to clients.

16. Does the enclosure consist of?
  — You may pick a product with or CZPT an enclosure.

seventeen. What are the basic safety functions of the machine?
  — The emergency button is obtainable for all equipment. The protection doorway is optional.

eighteen. Is the screw driving program compatible with other robots?
  — Our screw driving system is suitable with the SCARA robotic, 6 axles robot.

19. Can I be your distributor?
  — Yes, we are open up to any firm that would like to turn into our distributor except in specified areas we currently have our own agent.

20. Do you offer a fixture for the machine?
  — Yes, we also can design and style the fixtures based mostly on consumer goods. For illustration, a rolling fixture for a number of surfaces fastening.  

21. What is the shipping expression?
  — Lead time is 20 business days.

Two Benches and Rails of Automatic Fastening Machine